Corporate Aluminium Partitioning Systems.
Series 2000D Double Glazing
This system has been developed due to the demand for high levels of acoustic isolation in certain applications, eg. Managers office, Conference rooms, Board rooms, Court rooms, Classrooms etc. Until now, to accomplish this in internal partitions, it has been by way of using ‘Plant On’ beads etc. creating a very bulky look and often a different detail to the other partitions, as well as providing the possibility of air gaps which greatly reduces the effectiveness of any system. With these factors, it led to the design of the #2000D series partition system, offering the designer the ability to acheive a rating of up to RW/STC 46 and still maintain a consistent partition detail.
As you will note from the installation details, it is possible to have a selection of systems, eg. if along a passage the Frontline system was used on the majority of offices (glass to passage) and the double glazed only on one office, at a glance it would look the same as the glass is in the same position on the passage side.
Without making a lot of noise about this system - especially since this innovative system is all about reducing noise - please note the tables showing the results achievable using the #2000D series compared with the single glazed partitions.
1 The above readings relate to the use of laminated glazing panels
2 These tables have been compiled by Bassett Acoustics - opinion number AA0279/DC/J01
Note: The STC ratings are not to be applied in a general sense to double glazing as the spacing of the glass and type of installation has an important factor in the performance of the system.
Specifications.
Main Frame #2000D
Similar in features to #2000, this is the primary section of our unrivalled Double Glazed Partition System, incorporating aesthetics and acoustics into one unique system This section will accept #2004D, #2004, #1004 & #1012 providing unlimited opportunities for the designer due to the interchangeability between the three systems.
Sill/Transom #2002D
Similar in features to #2002, this unique section facilitates the glazing of individual double glazed panels in conformity to AS1288-1994. This section will also accept #2003, #2004D, #2004 and #1004.
Glazing Adaptor #2004D
This section has been designed to snap into #2000D, #2000, #2002D, #1001, #1009, #1010 and #1011providing unparalleled design opportunities where double glazing is required.
Ceiling Frame Adaptor #2005D
Similar to #1005 and #2005, this section allows for full height double glazed panels to be installed extremely quickly into either #1010 or #1011 Ceiling Channels.