Corporate Aluminium Partitioning Systems.
Series 400 To match shopfront
Similar in design to the 1000 Series, this system was developed to match a typical shopfront size section i.e. 101 x 44. It is designed to be incorporated along with a steel stud and 13mm plasterboard wall without the need for angles/plaster stop beads being utilised to finish the plasterboard to extrusion junction, as is the case with standard shop front sections.
The 401 Section has been designed to accommodate the 1000 Series clip in adaptors further providing the designer complete flexibility of selection when using the Corporate series system.
THE 401 SECTION HAS BEEN DESIGNED TO ACCOMODATE THE 1000 SERIES CLIP IN ADAPTORS
Specifications.
Main Frame #401
This section which is similar in design to #1001 section and the primary section of the 400 Series system. A need in the market place was identified by Studform where architects and designers require a commercial shopfront type section to be used in conjunction with internal steel stud and plasterboard partition walls.
Difficulties arise using standard shopfront sections with steel studwork, as their are no fins to attach the extrusion to the studwork plus the shape of the section does not allow the plasterboard to be fitted in behind the flange hence requiring a flushed angle or similar to provide an acceptable finish.
This section can be used in conjuction with standard shopfront sill and sill bead sections to compliment the suite.